地 址:张家口高新技术产业开发区通泰大街6号
电 话:0313-5953535 5953505
网 址:www.tradeflow21.com
邮 箱:sales@parsonszjk.com
邮 编:075000
|
梯齿环符合DIN22258 Part1 1983标准,高于国内MT/T 99-1997标准,在制造过程中选择了富含Cr、Ni、Mo合金元素的高合金钢和多重热处理工艺,以确保其(平立两用)与配套链轮的配合,安全运行。梯齿环表面经过特殊防腐处理,延长了使用寿命。
梯齿型接链环垂直安装使用时,一定要注意装配方向,保证上方箭头与传动方向一致
T-tooth Connector(for vertical and horizontal use,horizontal link connector is preference)
The T-tooth connector comply to the standard DIN 22258 part 1 ,which exceed the requirements in China Standard MT/T99-1997 .The tensile and fatigue performance is particularly impressive and has been achieved by careful selection of raw material include Cr,Ni and Mo and heat treatment during the manufacturing process.
The perfect engagement with sprocket either in Horizontal or Vertival has been achived .The surfaces of T -tooth connector have been treated through anti-corrosion process to expand its work life.
Please be aware of the fitting direction when assembling for vertical use, keep the top arrow direction with the transmission direction.
梯齿环机械性能
疲劳试验最小40000次;品均应力150N/mm2;振幅±100N/mm2;KV冲击试验最小55J(典型的70J)
参考DIN22258:2003第1部分验证方法和程序
Fatigue Test-4000 cycles min .Mean stress 150N/mm2.Amplitude +-100N/mm2 Ipact KV Test -55j.min(70J typical)
Refer to DIn22258:2003 Part 1 for verification methods and procedures
尺寸
安装与维护
梯齿型接链环安装说明书提供了安装和维护的正确方法
*定义检查磨损和损坏
*每三个月或是完成100万吨过煤量进行检查(如果用于转载机需要每个月检查一次)
*不要在两个接链环中插入其他部件
Assembly and Maintenance
An instruction leaflet is supplied with each T-tooth connector which gives guidance o correct assembly ad maintenance.
.Regularly check for wear or damage and free from dust.
.Fully examine every 3 months or 1M tonnes conveyed whichever is the sonner (For BSL use,examine monthly)
.Do not interchange components between connectors